Model: VP1T-V2    Cat.No.: VP1T-V2
Manufacturer: Moor Instruments Ltd

Skin probe. A combined Flow probe and temperature. Right angle.
The probe has a height of 12.5mm and a diameter (at the probe tip) of 8mm OD. The probe has a groove around the tip to allow flexible PH1-V2 and PH1-V2s probe holders to "clip" in (see accessories). Fibre separation is 0.5mm. Cable 3mm OD. For iontophoresis function, the VP1T-V2 probe can be directly used with the MIC2, ION1-P1 and ION3-P1 iontophoresis chambers shown as below.

Model: VP1T/7-V2    Cat.No.: VP1T/7-V2
Manufacturer: Moor Instruments Ltd

Large area Skin probe, combined Flow probe and temperature. It consists of 8 collecting fibres in a 2mm ring with a central delivery fibre. Right angle.
The probe has a height of 12.5mm and a diameter (at the probe tip) of 8mm OD. The probe has a groove around the tip to allow flexible PH1-V2 and PH1-V2s probe holders to "clip" in (see accessories). Fibre separation is 0.5mm. Cable 3mm OD. For iontophoresis function, the VP1T-V2 probe can be directly used with the MIC2, ION1-P1 and ION3-P1 iontophoresis chambers shown as below.

Model: VP2T/VP2    Cat.No.: VP2T/VP2
Manufacturer: Moor Instruments Ltd

Skin Probe.
VT2T is a combined Flow probe and temperature.
The probe body is a plastic cylinder 30mm high with a 6mm OD. Fibre separation is 0.5mm. Lead diameter is 3mm OD. Iontophoresis: used with ION1-P2 and ION3-P2 chambers.
VT2 is without temperature measuring feature.

Model: VP7a/T    Cat.No.: VP7a/T
Manufacturer: Moor Instruments Ltd

Large area Skin Probe. A combined Flow probe and temperature.
It consist of 8 collecting fibres on a 2mm ring with a central delivery fibre. The probe body is a plastic cylinder 30mm high with a 6mm OD. Lead diameter is 3mm OD. Iontophoresis: used with ION1-P2 and ION1-P2 chambers.

Model: VP2/VP2b    Cat.No.: VP2/VP2b
Manufacturer: Moor Instruments Ltd

Skin Probe.
Plastic cylinder 30mm in length with a diameter of 6mm. For use with the PH2 probe holder. The probe holder can be secured to the skin using a double sided adhesive disc (PAD). Fibre separation 0.5mm.
Model VP2b is as a VP2 but with a fibre separation of 0.25mm.

Model: VP3/VP3b    Cat.No.: VP3/VP3b
Manufacturer: Moor Instruments Ltd

Blunt Needle End Delivery Probe.
A hypodermic stainless steel tube of external diameter 1.5mm. The length is normally 30mm or 80mm. Separation of fibres is 0.5mm.
Model VP3b is as a VP3 but with a fibre separation of 0.25mm.

Model: VP3c    Cat.No.: VP3c
Manufacturer: Moor Instruments Ltd

Single use Blunt Needle End Delivery Cerebral Perfusion Probe.
A hypodermic stainless steel tube of external diameter 0.8mm, length 80mm. Separation of fibres is 0.5mm. The VP3c probe is supplied as a sterilized product.

Model: VP4/VP4s    Cat.No.: VP4/VP4s
Manufacturer: Moor Instruments Ltd

Blunt Needle End Delivery Probe.
A hypodermic stainless steel tube of external diameter 0.8mm. The length is normally 30mm or 80mm. Separation of fibre centres is 0.25mm. The VP4s uses a 26-gauge needle (external diameter 0.46mm).

Model: VP4sd    Cat.No.: VP4sd
Manufacturer: Moor Instruments Ltd

Blunt needle Probe Side delivery.
A side delivery needle probe delivering light through a window on the side of a piece of 0.84mm OD needle. The window is within 5mm of probe tip. Typical lengths are 30-80mm.

Model: VP5a/VP5b    Cat.No.: VP5a/VP5b
Manufacturer: Moor Instruments Ltd

Blunt Needle 90 degree End Delivery Probes.
Probes VP5a is a hypodermic stainless steel tubing with angled tip providing right angled delivery for ease of access to some measurement sites such as the oral mucosa and teeth. The VP5a has a tube diameter of 1.5mm while probe VP5b has a tube diameter of 0.8mm. The length of the probe can be specified between 30mm-80mm and the right angle extension length between 5mm-10mm.
The VP5a has a fibre centre separation of 0.5mm.
The VP5b has a fibre centre separation of 0.25mm.

Model: VP5bs    Cat.No.: VP5bs
Manufacturer: Moor Instruments Ltd

Blunt needle 180 degree End Delivery Probe.
The probe VP5bs is a hypodermic stainless steel tubing with angled tip providing right angled delivery for ease of access to some special measurement sites such as the oral mucosa and teeth. The VP5bs has a tube diameter of 0.8mm. The length of the probe can be specified between 60mm-120mm and the end right angle extension length between 5mm-10mm.

Model: VP5sp    Cat.No.: VP5sp
Manufacturer: Moor Instruments Ltd

Low Profile Side Delivery Flat Probe.
Probe VP5sp is for use on moist tissue surfaces including organs and muscles. It adheres to tissue using two suction cups on the underside of the probe head. Suction is provided by a disposable closed wound-drainage system. The VP5sp can also be secured to tissue by sutures through its peripheral skirt.
Material: silicone rubber. Dimensions: L32.5xW12xH6 mm.

Model: VP6a/VP6b    Cat.No.: VP6a/VP6b
Manufacturer: Moor Instruments Ltd

Endoscope End Delivery Probe.
An end delivery endoscope probe with flexible nylon sleeving. Probe VP6a has 2.1mm diameter sleeving while probe P6b has 1.35mm diameter sleeving. Both probes have steel tips, 6mm length, surrounded by the nylon sleeving. The probe VP6a has a fibre separation of 0.5mm while probe VP6b has a fibre separation of 0.25mm. Standard fibre length is 3m.
Also available are single fibre probes with detachable ?slave? connectors.

Model: VP7a    Cat.No.: VP7a
Manufacturer: Moor Instruments Ltd

Large area Skin Probe with Multiple Collector Fibres.
The large area probe uses 8 collecting fibres positioned in a ring, diameter 2mm, around the central light delivery fibre. The VP7a is a plastic cylinder of diameter 6mm and length 30mm. The light collecting area for VP7 type probes is approximately 10 times that of a standard probe.
Note: the large separation of centre of the delivery and a collecting fibre (approximately 1mm) will result in collection of light from deeper tissue levels than those measured using the standard 0.5mm separation.
Iontophoresis: used with an ION1-P2 and ION3-P2 chamber.

Model: VP7b    Cat.No.: VP7b
Manufacturer: Moor Instruments Ltd

Blunt Needle End Delivery Probe Multiple Collector Fibres.
The large area probe uses 8 collecting fibres positioned in a ring, diameter 2mm, around the central light delivery fibre. The VP7b is a stainless steel tube of diameter 3mm and standard length 30mm. Tube length up to 120mm available. The light collecting area for VP7 type probes is approximately 10 times that of a standard probe.
Note: the large separation of centre of the delivery and a collecting fibre (approximately 1mm) will result in collection of light from deeper tissue levels than those measured using the standard 0.5mm separation.

Model: VP7c    Cat.No.: VP7c
Manufacturer: Moor Instruments Ltd

Skin Probe Multible Collector Fibres
The large area probe uses 8 collecting fibres positioned in a ring, diameter 2mm, around the central light delivery fibre. The VP7c is a plastic disc of diameter 8mm and length 8mm. The light collecting area for VP7 type probes is approximately 10 times that of a standard probe. Note: Note: the large separation of centre of the delivery and a collecting fibre (approximately 1mm) will result in collection of light from deeper tissue levels than those measured using the standard 0.5mm separation

Model: VP8a    Cat.No.: VP8a
Manufacturer: Moor Instruments Ltd

Skin probe.
Probe VP8 uses a small prism epoxied to the optical fibre to provide right-angle delivery of light and a low profile. In the VP8a the prism is held in an epoxy disc of 6mm diameter and approximately 2.5mm thickness. Separation of fibre centres is 0.5mm.

Model: VP8b    Cat.No.: VP8b
Manufacturer: Moor Instruments Ltd

Skin probe with Low Profile Right-angle Delivery.
The VP8b probe uses a small prism epoxied to the optical fibre to provide right-angle delivery of light and a low profile. In the VP8b the prism is mounted in a hemispherical epoxy end (diameter 6mm and height 2.5mm) and is suitable for measurements in nasal or oral cavities. Separation of fibre centres is 0.5mm.

Model: VP8c    Cat.No.: VP8c
Manufacturer: Moor Instruments Ltd

Suturable Skin probe with Low Profile Right Angle Delivery.
The VP8c titanium disc probe has a 2.1mm OD flexible nylon sleeve with a titanium disc probe head. The probe head is 8mm OD and 2.5 mm high. The head has 4 suture holes drilled in it to provide stability during measurements. Light is delivered at a right angle from the probe head via a central window.

Model: VP8d    Cat.No.: VP8d
Manufacturer: Moor Instruments Ltd

Skin probe - Single Use - Low Profile Side Delivery Suturable.
The VP8d is a low profile side delivery suturable probe. The probe head is formed from moulded silicon elastomer diameter 12mm, height 2.5mm. The head has three 1.5mm holes for suturing if it is required to stabilize the position of the probe on the tissue surface. Light is delivered at right angles to the flat face of the silicon rubber disc.

Model: VP9    Cat.No.: VP9
Manufacturer: Moor Instruments Ltd

Skin Probe Multi-emitter/ Multi-collector
The VP9 is a multi-emitter/multi-collector probe. The probe has 8 emitting fibres and 8 collecting fibres, 7 equally spaced on a circle diameter of 4mm with one central emitter/collector. Light is collected from 8 tissue sites. Length 20mm, diameter 8mm.
For use with PH1 probe holders which can be attached to the skin via a double sided adhesive disc (PAD).